Рубрики
Диагностичекий

Выбор запуска в окне MSConfig позволяет вернуться в режим выборочной перезагрузки

В msconfig после диагностический запуск появились проблемы как исправить

Выбор запуска в окне MSConfig позволяет вернуться в режим выборочной перезагрузки.

В средстве настройки системы (Msconfig. exe) вы можете выбрать вариант ОбычныйЗапуск, Диагностический запускИли Выборочный запуск. Если вы выбрали вариант Обычный запуск , при перезагрузке компьютера параметр может измениться на параметр Выборочный запуск .

Причина

Если вы выберете один из вариантов в диалоговом окне » Дополнительные параметры устранения неполадок » в MSConfig, параметр » Обычный запуск » возвращает значение » Выборочный запуск».

Решение

Чтобы использовать параметр » Обычный запуск «, снимите все флажки в диалоговом окне Дополнительные параметры устранения неполадок.

Выбор запуска в окне MSConfig позволяет вернуться в режим выборочной перезагрузки.

В средстве настройки системы (Msconfig. exe) вы можете выбрать вариант ОбычныйЗапуск, Диагностический запускИли Выборочный запуск. Если вы выбрали вариант Обычный запуск , при перезагрузке компьютера параметр может измениться на параметр Выборочный запуск .

Если вы выберете один из вариантов в диалоговом окне » Дополнительные параметры устранения неполадок » в MSConfig, параметр » Обычный запуск » возвращает значение » Выборочный запуск».

Если вы выбрали вариант Обычный запуск, при перезагрузке компьютера параметр может измениться на параметр Выборочный запуск.

Support. microsoft. com

02.09.2019 21:15:24

2019-09-02 21:15:24

Источники:

Https://support. microsoft. com/ru-ru/topic/%D0%B2%D1%8B%D0%B1%D0%BE%D1%80-%D0%B7%D0%B0%D0%BF%D1%83%D1%81%D0%BA%D0%B0-%D0%B2-%D0%BE%D0%BA%D0%BD%D0%B5-msconfig-%D0%BF%D0%BE%D0%B7%D0%B2%D0%BE%D0%BB%D1%8F%D0%B5%D1%82-%D0%B2%D0%B5%D1%80%D0%BD%D1%83%D1%82%D1%8C%D1%81%D1%8F-%D0%B2-%D1%80%D0%B5%D0%B6%D0%B8%D0%BC-%D0%B2%D1%8B%D0%B1%D0%BE%D1%80%D0%BE%D1%87%D0%BD%D0%BE%D0%B9-%D0%BF%D0%B5%D1%80%D0%B5%D0%B7%D0%B0%D0%B3%D1%80%D1%83%D0%B7%D0%BA%D0%B8-4b506ba7-961e-8d4f-4bf0-51a0a98aaf56

Start your PC in safe mode in Windows » /> » /> .keyword { color: red; } В msconfig после диагностический запуск появились проблемы как исправить

Start your PC in safe mode in Windows

Start your PC in safe mode in Windows

Safe mode starts Windows in a basic state, using a limited set of files and drivers. If a problem doesn’t happen in safe mode, this means that default settings and basic device drivers aren’t causing the issue. Observing Windows in safe mode enables you to narrow down the source of a problem, and can help you troubleshoot problems on your PC.

There are two versions of safe mode: Safe Mode and Safe Mode with Networking. Safe Mode with Networking adds the network drivers and services you’ll need to access the internet and other computers on your network.

Select from the following sections to find out how to start your PC in safe mode from Settings, from the sign-in screen, or from a black or blank screen.

Press Windows logo key + I on your keyboard to open Settings. If that doesn’t work, select the Start button, then select Settings .

Select System > Recovery .
Open Recovery Settings

Under Recovery options, next to Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

On the Windows sign-in screen, press and hold the Shift key while you select Power > Restart .

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to restart into Automatic Repair, and select Advanced options to enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: Restarting your device should be sufficient to exit you from Safe Mode back into normal mode. However, if for some reason your machine is still booting into Safe Mode on its own after restarting, try this:

Press the Windows logo key + R.

Type Msconfig in the Open box and then select OK.

Select the Boot tab.

Under Boot options, clear the Safe bootCheckbox.

Press Windows logo key + I on your keyboard to open Settings. If that doesn’t work, select the Start button, then select Settings .

Select Update & Security > Recovery .
Open Recovery Settings

Under Advanced startup, select Restart now.

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. Or if you’ll need to use the internet, select 5 or press F5 for Safe Mode with Networking.

When you can’t open Settings to get into safe mode, restart your device from the Windows sign-in screen.

On the Windows sign-in screen, press and hold the Shift key while you select Power > Restart .

After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your PC restarts, you’ll see a list of options. Select 4 or F4 to start your PC in safe mode. Or if you’ll need to use the internet, select 5 or F5 for Safe Mode with Networking.

Note: If you’ve encrypted your device, you’ll need your BitLocker key to start in safe mode.

Before you enter safe mode, you need to enter the Windows Recovery Environment (winRE). To do this, you will repeatedly turn your device off, then on:

Hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

On the first sign that Windows has started (for example, some devices show the manufacturer’s logo when restarting) hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

When Windows restarts, hold down the power button for 10 seconds to turn off your device.

Press the power button again to turn on your device.

Allow your device to fully restart. You will enter winRE.

Now that you are in winRE, you will follow these steps to take you to safe mode:

On the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

choose an option screen in the windows recovery environment.

troubleshoot screen in the windows recovery environment.

advanced options screen in the windows recovery environment.

startup settings screen in the windows recovery environment.

After your device restarts, you’ll see a list of options. Select option 5 from the list or press F5 for Safe Mode with Networking.

If you need more info on a black or blank screen error, see Troubleshoot black or blank screen errors.

Notes: Restarting your device should be sufficient to exit you from Safe Mode back into normal mode. However, if for some reason your machine is still booting into Safe Mode on its own after restarting, try this:

Open Recovery Settings.

Support. microsoft. com

05.02.2020 14:12:45

2020-02-05 14:12:45

Источники:

Https://support. microsoft. com/en-us/windows/start-your-pc-in-safe-mode-in-windows-10-92c27cff-db89-8644-1ce4-b3e5e56fe234

Open MSconfig using Command Prompt & Other Ways » /> » /> .keyword { color: red; } В msconfig после диагностический запуск появились проблемы как исправить

Open MSconfig using Command Prompt & Other Ways

В msconfig после диагностический запуск появились проблемы как исправить

launch msconfig via command and other ways

Ways of running the MsConfig command

There are basically three main ways to run the MsConfig Command in your system and the command is easily accessible on Windows 10/8/7 and older versions of Windows. So, lets check how to launch Msconfig quickly:

Method 1: Using the Run Command

In order to run the MsConfig program through Run Command, you need to follow below simple steps:

launch msconfig using run command

    Press Windows + R button and this will open Run command Now type Msconfig and hit Enter

This will launch the MsConfig program on your windows computer.

Method 2: MSConfig from the command prompt

Another useful and easy way of executing MSConfig is through the Command prompt. You need to open the administrator command box with this method and type the command and watch your system execute the same.

To open the command prompt the user needs to :

The system will then automatically execute the MsConfig command.

It is however very important to note that the system needs a command in a proper understandable format to execute it. So just writing Msconfig in the administrator command window would give an error message because the command becomes unrecognizable to the system. So, the command has to be “Start MsConfig”.

You can check related such type of article on how to check system information using run command.

Method 3: Shortcut to MSConfig

The above methods work fine. However, if you use the Msconfig command pretty often it would a smart move to create a shortcut for the same for on your desktop.

    Click on the Start button and type “MsConfig” in the search bar that appears Right click on “MsConfig. exe”. From the menu that appears, select “Send to” Select “Desktop” from the next menu that appears.

These steps will create a Shortcut for the system to run the Msconfig command on desktop.

Thus, use MSConfig effectively on your computer to speed up the start up process for windows by disabling certain softwares and processes. This beautiful system configuration works on all versions of windows.

Ankita

Founder and Writer @ WinOSBite. Future plan is to make this platform open to community to resolve and discuss various issues, usage related to Operating System.

Related Posts

print to file in browser

What is Print To File, and How to Use it?

At the point when you don’t have a printer, or you have to print documents to be changed over to PDF or any other such… Read More » What is Print To File, and How to Use it?

Run command for Active Directory

There are several ways to open the active directory using the command line and the other 2 methods. The main uses of this tool are… Read More » Run command for Active Directory

shutdown r command line

Reboot Windows System using Command line (CMD)

In order to use the command line terminal for rebooting purposes in Windows computer, you must know what is a Command-line Terminal. Well, the Command-line… Read More » Reboot Windows System using Command line (CMD)

В msconfig после диагностический запуск появились проблемы как исправить

launch msconfig via command and other ways

There are basically three main ways to run the MsConfig Command in your system and the command is easily accessible on Windows 10/8/7 and older versions of Windows. So, lets check how to launch Msconfig quickly:

Method 1: Using the Run Command

In order to run the MsConfig program through Run Command, you need to follow below simple steps:

launch msconfig using run command

    Press Windows + R button and this will open Run command Now type Msconfig and hit Enter

This will launch the MsConfig program on your windows computer.

Method 2: MSConfig from the command prompt

Another useful and easy way of executing MSConfig is through the Command prompt. You need to open the administrator command box with this method and type the command and watch your system execute the same.

To open the command prompt the user needs to :

The system will then automatically execute the MsConfig command.

It is however very important to note that the system needs a command in a proper understandable format to execute it. So just writing Msconfig in the administrator command window would give an error message because the command becomes unrecognizable to the system. So, the command has to be “Start MsConfig”.

You can check related such type of article on how to check system information using run command.

Method 3: Shortcut to MSConfig

The above methods work fine. However, if you use the Msconfig command pretty often it would a smart move to create a shortcut for the same for on your desktop.

    Click on the Start button and type “MsConfig” in the search bar that appears Right click on “MsConfig. exe”. From the menu that appears, select “Send to” Select “Desktop” from the next menu that appears.

These steps will create a Shortcut for the system to run the Msconfig command on desktop.

Thus, use MSConfig effectively on your computer to speed up the start up process for windows by disabling certain softwares and processes. This beautiful system configuration works on all versions of windows.

Ankita

Founder and Writer @ WinOSBite. Future plan is to make this platform open to community to resolve and discuss various issues, usage related to Operating System.

So, lets check how to launch Msconfig quickly.

Www. winosbite. com

06.05.2017 18:07:18

2017-05-06 18:07:18

Источники:

Https://www. winosbite. com/open-msconfig-using-run-command/

Добавить комментарий

Ваш адрес email не будет опубликован.